Skip to main content

Full text of "Remote Control"

See other formats

Automatic Chicken Coop 

Makej Projects 

Automatic Chicken Coop 

Written By: Alan Graham 


Growing up on a farm, there were many unpleasant tasks. Summers were filled with 
backbreaking labor, not to mention the daily chores of milking 80 or so cows and collecting 
the eggs and feeding the chickens. 

I now live in the city of Portland, Ore., and I've come to miss those farm days of 20 years 
ago. When I decided to get a couple of chickens, I was adamant that the work involved 
wouldn't seem like work. Gone are the days where I'd wake before dawn to get to the barn or 
prepare for a cold day chopping wood. These days it's all about waking with the sun. 

One of the delightful aspects of chickens is that they're low-maintenance. As long as they 
can get out of the coop, grab a bite to eat, have access to fresh water, and retreat to a safe 
area at night, you basically have very little to do to keep them happy. 

And seeing as I'm now a lazy, citified man, I wanted a solution that allowed for late 
mornings, weekend getaways, peace of mind, and avoiding any possible exposure to the 
elements, either to let the fowl out or collect the eggs. So with a few ideas garnered from 
around the web, and a few of my own, I cobbled together a henhouse that accomplishes a 
number of tasks without a single finger lifted, yet provides me with the knowledge that my 
lovely birds are always out at daybreak, but in at curfew. 

I created an automated henhouse in my garage with an infrared motion detector, automatic 
lights, heater, and automated door. I know when they get out in the morning and I know when 
they come back in at night. Here's how I put it all together. 

) Make Projects Page 1 of 8 

Automatic Chicken Coop 

Step 1 — How my henhouse works. 

• My system runs off a Mac Mini with home automation software, but what I'll describe here 
is a system you can build without a computer, using components from the online retailer . 

• My coop kicks on supplemental lights 2 hours before sunrise to increase egg laying in 
winter months 

• At 45 minutes after sunrise, the automated door rises (and I receive a verification 
email/text), allowing the girls to venture out into the yard for a little free-range foraging. To 
go in or out of the coop, the 2 chickens must cross a motion detector, which sends me a 
notification that they've left (another email/text). 

• By counting the notifications, I also know when they're done laying their eggs in the 
morning. Then the supplemental lights and a waterproof heating pad both turn off. The door 
remains open throughout the day and the girls will sometimes wander back to grab a bite. 

) Make Projects 

Page 2 of 8 

Automatic Chicken Coop 

Step 2 

/ ~ -h ,Vi 


Text from 1010100005 



pP^ \: : '"* • - N ^% •T.^SS 

i»* • .. 

• At sunset the supplemental light turns on in their coop, summoning them to return for the 
night. At this time the heating pad also turns on, giving them a little extra heat on cold 
winter nights. When the girls wander into their coop, an infrared motion detector registers 
their entrance and sends me an email/text notification so that I know, no matter where I 
might be, that the girls are safely in the building. Since they always wander in one after 
another, I get 2 notifications, one for each bird. 

• At 35 minutes after sunset, the chicken door closes and sends me a final confirmation via 
email/text that this has occurred. One hour later, the supplemental lights go off, and the 
girls are ready for their evening rest. 

• In the next section I'll describe a simpler system. 

) Make Projects 

Page 3 of 8 

Automatic Chicken Coop 

Step 3 — Automate a simple motion detector and lamp to count your 

• Imagine that you're sitting in the warmth and comfort of your home. You want to lock your 
gals up for the night, but you aren't sure when they'll finally wander in. Put a motion 
detector in the coop and link it to a table lamp in your house. When the hens arrive in their 
home, a lamp turns on in yours. 

• Smarthome's Wireless Insteon Motion Sensor (part #2420M, $35) is the most affordable 
way to detect hen arrival. However, the trick with this type of motion detector is that, since 
it covers a wide area (40' by 110° arc), you don't want it to constantly pick up motion from 
moving chickens and turn your light on and off all the time. 

• Instead, you want to limit it to sensing when the chicken crosses the threshold of the coop. 
I accomplished this by embedding the motion detector in a deep oatmeal can and pointing 
it across the threshold to create a focused beam in one precise location. 

• With the motion detector in place, the next thing you'll require is some type of notification. 
You might use Smarthome's LampLinc Dimmer Module (part #2457D2, $50). It works as 
both a lamp controller and an RF receiver that can be linked directly to the motion 

) Make Projects 

Page 4 of 8 

Automatic Chicken Coop 
Step 4 

• After plugging a lamp into the 
LampLinc, you link the motion 
detector and LampLinc devices 
together by simply pressing a 
button on the back of the motion 
detector for a few seconds and 
then pressing a button on the 

• Once the two are linked, the 
detector will send an RF signal up 
to 150' to the LampLinc device 
whenever motion is detected. 
When the LampLinc receives the 
ON signal, it will turn the lamp on. 

• Now, the motion detector can and 
will send an OFF signal if it doesn't 
detect motion within 60 seconds. 
We don't actually want the 
LampLinc to turn off unless we 
manually turn it off. 

• To prevent this, simply unscrew 
the back panel of the motion 
detector, place the included jumper 
on both #4 jumper pins, and tap the 
Set button once. Now the motion 
detector will send only the ON 

) Make Projects 

Page 5 of 8 

Automatic Chicken Coop 

Step 5 — But wait, there's more. 

• If you're willing to spend the money, there are a number of ways you can further automate 
your henhouse. Let's say when the hens come home at night and cross the motion 
detector, you want to trigger a heater or heating pad. 

• Add a TimerLinc (part #2456S3T, $46) and an Insteon Appliance On/Off Module (part 
#2856S3B, $30). When the hens come home the Appliance Module can turn on a small 
warming pad or other device, and then the TimerLinc can be set to turn off the device in 
the morning. 

• Combine them with the Motorized Drape Controller (part #3142, $100), a sliding wooden 
door, some drape cord, and a counterweight, and you've got an automated chicken door 
that will open and close at specific times during the day, just like mine 

) Make Projects 

Page 6 of 8 

Automatic Chicken Coop 
Step 6 



• Got predators? Combine the automated door with the Insteon Door Strike Kit (Figure K, 
part #51901, $138). Then set the TimerLinc to lock the henhouse door after it closes for 
the evening and unlock it in the morning before opening. 

Step 7 — Control the coop via your iPhone. 

• do shell script "curl -v -d gl='US' -d hl='en' -d 
client='navclient-f f sms ' -d c='l' -d mobile_user_id=' 15555555 ' -d 
carrier='ATT' -d ec=" -d sub ject=' CHICKEN ALERT' -d text='THE 
CHICKENS ARE IN, BOK BOK BOK' -d send_button= ' Send' 

http: //www. google . com/sendtophone" 

• This AppleScript command has an embedded shell script in it that calls out to Google's 
free SMS service. I also get an email from Indigo, which has built-in support for SMTP 
email protocols. Indigo also has an iPhone app and can be controlled via a built-in web 

• With a dynamic DNS service and port forwarding, you can access and control your coop 
from anywhere in the world. Add a webcam, and you can be not only a lazy chicken 
farmer, but a remote one as well. 

This project first appeared in MAKE Volume 22 , page 64. 

st generated on 2012-10-31 10:44:44 PM. 

) Make Projects 

Page 7 of 8 

Automatic Chicken Coop 

) Make Projects